Follow Avatar

ainow site

POWER SUPPLY BOARD 12V 5V 3.3V DC

POWER SUPPLY BOARD: ABOUT THE PRODUCT Power Board WHAT WE ARE GOING TO DO: -It is a general purpose board to provide power supply. HARDWARE AND SOFTWARE REQUIRED: Hardware: 12V Adaptor-1 Nos Power board-1 Nos. Multimeter-1 Nos DETAIL AND OPERATION OF THE PRODUCT : Provide 12v power supply board It has three various power supply pins It has 7805 voltage regulator is present to convert 12v to 5v It has 1117 voltage regulator is present to convert 5v to 3.3v It has two LED RED & YELLOW. RED led is used to indicate the 5v power supply YELLOW led is used to indicate the 3.3v power supply CONNECTION: -Provide 12v power supply to power board PROCEDURE: As per connections given Place the multimeter positive to the 12v and the gnd of multimeter to the gnd pin Same should be followed for the 5v and 3.3v OUTPUT : The corresponding values can be displayed in the multimeter.. WHAT SHOULD NOT BE DONE: Connection of vcc & gnd should not change.

Thumb

Avatar

0 repins 0 comments