During drilling operations, high drillstring vibrations may originate from various sources, namely, the bit-rock interaction, drillstring-wellbore contacts, stick-slip phenomena, fluid-structure interaction, and mass unbalances. Excessive vibrations may induce drilling equipment failures (fatigue, cracking, washouts, and ruptures), which can be costly and catastrophic. Therefore, it is crucial to accurately model the drillstring dynamics in order to help drilling engineers make better decisions and avoid harmful vibrational effects.
This paper proposes a numerical model developed in the time domain to estimate the drillstring lateral, axial, and torsional dynamics. It is based on the finite element method coupled with the Craig-Bampton reduction method (Craig and Bampton 1968) to reduce computation time. The drillstring-wellbore contact forces are automatically determined and may occur on both tool-joints and drill pipe bodies, and the drilling fluid is accounted for by its inertial and frictional effects.
The novelty of this dynamics model is that it can portray a realistic geometry of a drilling assembly in3D curved wells with the fluid presence and gives a complete study of the coupling phenomena between the axial, torsional, and lateral vibrations. The use of this novel dynamics model along with downhole data acquisition and wired pipe technology is one of the essential steps towards drilling automation to provide a better mitigation of drillstring vibrations.
Reach out the full tech paper here: https://www.helmerichpayne.com/resources/technical-publications/dynamics-vibration-prediction-and-comparison-with-downhole-data-measurements-in-unconventional-wells and be in touch with us here: https://www.helmerichpayne.com/contact.
This paper proposes a numerical model developed in the time domain to estimate the drillstring lateral, axial, and torsional dynamics. It is based on the finite element method coupled with the Craig-Bampton reduction method (Craig and Bampton 1968) to reduce computation time. The drillstring-wellbore contact forces are automatically determined and may occur on both tool-joints and drill pipe bodies, and the drilling fluid is accounted for by its inertial and frictional effects.
The novelty of this dynamics model is that it can portray a realistic geometry of a drilling assembly in3D curved wells with the fluid presence and gives a complete study of the coupling phenomena between the axial, torsional, and lateral vibrations. The use of this novel dynamics model along with downhole data acquisition and wired pipe technology is one of the essential steps towards drilling automation to provide a better mitigation of drillstring vibrations.
Reach out the full tech paper here: https://www.helmerichpayne.com/resources/technical-publications/dynamics-vibration-prediction-and-comparison-with-downhole-data-measurements-in-unconventional-wells and be in touch with us here: https://www.helmerichpayne.com/contact.