XL6009 DC DC Step Up Power Converter Module This XL6009 DC TO DC Step-up converter module is a non-isolated step-up (boost) voltage converter featuring

Thumb

Avatar

0 repins 0 comments

Find the best cost on HC05 Bluetooth Module in India. Shop now at Ainow for low prices on high-quality products for your electronics projects.

Thumb

Avatar

0 repins 0 comments

0.3MP OV7670 CAMERA MODULE The 0.3MP OV7670 Camera Module with High-Quality SCCB Connector is a low voltage CMOS image sensor; that provides the full functionality of a single-chip VGA(Video Graphics Array) camera and image processor in a small footprint package. The OV7670/OV7171 provides full-frame, sub-sampled or windowed 8-bit images in a wide range of formats; controlled through the Serial Camera Control Bus (SCCB) interface. This 0.3MP OV7670 Camera Module has an image array capable of operating at up to 30 frames per second (fps) in VGA; with complete user control over image quality, formatting and output data transfer. All required image processing functions, including exposure control, gamma, white balance; color saturation, hue control and more, are also programmable through the SCCB interface. In addition, OV7670 CAMERA CHIPs use proprietary sensor technology to improve image quality by reducing; or eliminating common lighting/electrical sources of image contamination; such as fixed pattern noise (FPN), smearing, blooming, etc., to produce a clean, fully stable color image. Applications: Cellular and Picture Phones. Toys. PC Multimedia. Digital Still Cameras. Features: High sensitivity for low-light operation. Low operating voltage for embedded portable apps. The standard SCCB interface is compatible with the I2C interface. Supports VGA, CIF, and resolutions lower than CIF for RGB (GRB 4:2:2, RGB565/555), YUV (4:2:2) and YCbCr (4:2:2) formats. VarioPixel® method for sub-sampling. Automatic image control functions includes : Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC). Image quality controls including color saturation, hue, gamma, sharpness (edge enhancement), and anti-blooming. ISP includes noise reduction and defect correction. Supports LED and flash strobe mode. Supports scaling. Lens shading correction. Flicker (50/60 Hz) auto-detection. Saturation level auto adjust (UV adjust). Edge enhancement level auto-adjust. De-noise level auto-adjust. Sleep Power consumption: <20μA. Stable operation: 0 ° C to 50 ° C. Browse mode line by line. Electronic exposure 1 line to 510 lines. Output format: (8-bit) YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data. Material: plastic metal.

Thumb

Avatar

0 repins 0 comments

Find the best cost on R307 Fingerprint Sensor Module in India. Shop now at Ainow for low prices on high-quality products for your electronics projects.

Thumb

Avatar

0 repins 0 comments

EM-18 TTL RFID reader Module: The EM-18 module is commonly used in projects for RFID (Radio Frequency Identification) readers. It enables direct interface with microcontrollers through UART communication. This particular module is specifically designed to read codes from 125 KHz card compatible read-only tags and also allows for read/write capabilities. Each card is identified by a unique value stored in the chip inside. Highlighted characteristics of EM-18 TTL RFID reader Module: Frequency used: 125Khz The baud rate is set at 9600. The interface options available are TTL or Wiegand26. The voltage needed for operation is between DC 3.3V and 5V. Current usage: 19mA to 25mA. The maximum reading distance is 35mm. The operating temperature ranges from -10℃ to 70℃. Temperature range for storage: -20℃ to 80℃ The humidity level ranges from 0% to 95%. Output in both Serial and TTL formats. Superb read capabilities without the need for an external circuit. Small and budget-friendly. Incorporating an RFID coil antenna. Efficient energy usage Inexpensive Steps to establish a connection: Attach a 5V power supply to the RFID TTL connection. Upon connecting the power supply, the LED will blink. Connect the Tx pin of the EM-18 module to the TTL Rx. The coil within the EM-18 module produces emf pulses for card detection purposes. The card is equipped with both a coil and a chip that houses a distinctive hexadecimal code, which is then sent through the TTL transmitter. The buzzer will sound upon reading the card. The expected result will be in the form of a hexadecimal value and can be found in an external terminal, such as a PC. There are various ways in which this software can be utilized. These include its potential applications in business, education, and personal use. E-commerce has become a crucial aspect of business in today’s digital world. It has revolutionized the way companies conduct transactions and interact with customers. With the increasing use of technology, it has become imperative for businesses to have an online presence through e-commerce platforms. The coordination of transportation and logistics. Management and safeguarding of infrastructure Passports are essential documents that allow individuals to travel internationally. The payments for transportation changed Identification of animals Information

Thumb

Avatar

0 repins 0 comments

Find the best cost on Force Sensor Resistor in India. Shop now at Ainow for low prices on high-quality products for your electronics projects.

Thumb

Avatar

0 repins 0 comments

MAX30100 Pulse Oximeter Heart Rate Sensor Module The MAX30100 Pulse Oximeter Heart Rate Sensor Module, known as Heart Rate click, operates through an optical sensor. This sensor utilizes two LEDs, a red and an infrared one, to emit wavelengths and measure the absorbance of pulsing blood with a photodetector. The combination of these LED colors is specifically designed to provide accurate readings when placed on the tip of one’s finger. The low-noise analog signal processing unit processes the signal and transmits it to the target MCU via the mikroBUS I2C interface. However, developers should be aware that excessive motion and temperature fluctuations may affect the accuracy of the readings. Additionally, applying too much pressure could restrict capillary blood flow and compromise the reliability of the data. To provide further customization, there is a programmable INT pin available on this device. It operates with a 3.3V power supply. Some common uses: MAX30100 Pulse Oximeter Heart Rate Sensor Module used for monitoring health conditions Devices to Help with Fitness Wearable devices have become increasingly popular in recent years, as technology continues to advance. These gadgets provide convenience and ease for daily tasks, making them a must-have for many people. From fitness trackers to smart watches and even virtual reality headsets, these wearable devices offer a range of features that enhance our daily lives. Please refrain from repeating the same information multiple times in order to avoid redundancy. The berg pin connector is not included in the module. The arrangement of pins: The definition of pins, as stated by SN PINS… 1 The VIN input voltage range is from 1.8V to 5.5V. The second paragraph of the IIC-SCL section is a restatement of the same information. The acronym SDA is used twice in this phrase, so instead let’s say IIC-SDA. The paragraph you entered is: The IRD MAX30100 IR_DRV is a module that allows for the detection of infrared light. Max30100 driver for RD6 GND, also known as Ground. List of Specifications and Features of MAX30100 Pulse Oximeter Heart Rate Sensor Module: An optical sensor that utilizes both an infrared light and a red LED, in addition to a photodetector. Measures the absorption of blood pulsations. The I2C interface and its accompanying INT pin. MCU The analog front that offers exceptional performance. Optimizing energy efficiency extends the battery lifespan of wearable gadgets. MAX30100 Pulse Oximeter Heart Rate Sensor Module boasts a high sample rate capability, fast data output capability, as well as ambient and light cancellation features. This is a sensor solution that combines both pulse oximetry and heart rate monitoring.

Thumb

Avatar

0 repins 0 comments

Find the best cost on PH Sensor PCB Type with Level and LDR in India. Shop now at ainow.in for low prices on high-quality products for your electronics project.

Thumb

Avatar

0 repins 0 comments

ACS712 20A Current Sensor Module The ACS712 20A Range Current Sensor Module is comprised of a precise Hall circuit with a copper conduction path near the surface of the die. When an electrical current runs through the copper path, it creates a magnetic field that is then converted into a corresponding voltage by the Hall IC. Ensuring and regulating the flow of current is a crucial factor in numerous applications, such as over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, and programmable current sources. The ACS712 20A Current Sensor Module utilizes the ACS712 sensor to precisely measure both AC and DC current. The maximum detectable AC or DC current is 20A, and it can be read through the analog I/O port of Arduino. Do not introduce too many unnecessary variables. Please note that the product’s color may vary during shipping and you may receive any one of the available options. We are providing an additional two modules that contain the ACS712 IC for current measurement. These modules are listed below. Introducing the ACS712 20A Current Sensor Module. The ACS712 is a range current sensor module with a rating of 30A. It is important to balance your work and personal life for a healthy lifestyle. When utilizing ACS712, it is important to consider the Hall detection principle and its sensitivity to magnetic fields. Keeping this in mind will prevent any potential accuracy issues with the readings. Diagram of Connections: The arduino_ACS712 is the perfect tool for measuring current. The Arduino ACS712 is a highly useful tool for measuring electrical current. The characteristics of ACS712 20A Current Sensor Module include: The analog signal path with minimal noise. The new FILTER pin is responsible for adjusting device bandwidth. The output rise time in response to a step input current is -5 µs. Compact, low-profile SOIC8 packaging. The minimum isolation voltage from pins 1-4 to pins 5-8 is at least 2.1 kV RMS. Operating at a single supply voltage of -5.0 V. The output sensitivity ranges from 66 mV to 185 mV per ampere. Voltage output corresponding to both alternating and direct currents Precision-tuned in the factory for optimal accuracy. Exceptionally consistent output offset voltage. The magnetic hysteresis is close to zero. The output ratio of the supply voltage.

Thumb

Avatar

0 repins 0 comments

Find the best cost on TCS3414CS Color Detector Sensor Module in India. Shop now at Ainow for low prices on high-quality products for your electronics project.

Thumb

Avatar

0 repins 0 comments

PICKIT3 USB Debugger Introducing the PICKIT3 USB Debugger Programmer Emulator Controller Development board. Its USB connection provides a reliable alternative to the ICD2. With an offline burning feature, it allows for convenient programming and batch burning of products. The power supply input can be easily managed through MPLAB IDE. Introducing PICKIT3.5, now compatible with Win7 operating system. With a complete patch design and reflow soldering processing, the quality of our product is more reliable. We also provide developing data for PICs and a manual for C language development tools. You can explore numerous basic experiment program codes for PICs, along with details on how to use ICD2 and PICKIT3 effectively. At a highly cost-effective price, the MPLAB PICkit 3 enables debugging and programming of both PIC® and dsPIC® Flash microcontrollers. Its user-friendly graphical interface is integrated into the MPLAB IDE. This tool connects to a design engineer’s PC through a full-speed USB interface and can be linked to the target via a Microchip debug (RJ-11) connector, which is compatible with MPLAB ICD 2, MPLAB ICD 3, and MPLAB REAL ICE. The key elements of PICKIT3 USB Debugger: Full-speed USB support with compatibility using standard drivers for Windows operating systems. Executing in real-time Processors operate at their highest possible speeds. The monitor includes protection against both over-voltage and short circuits. The voltage should be kept below 5V, within the range of 1.8 to 5V. Manipulate the microcontroller’s program and data memory. The diagnostic LEDs for power, activity, and status. Manipulate program and data memory of the microcontroller Perform a memory wipe, including all types of memory (EEPROM, ID, configuration, and program), with verification. The breakpoint causes a freeze in the peripheral. Input a maximum of 512K bytes of data into the program’s flash storage.

Thumb

Avatar

0 repins 0 comments

ST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug. Use this device to send program code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers. The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST) and GND. The connector on the opposite side of this device is a USB connector and is intended to be plugged into the computer. Note: The product is available in Multiple colors Will be shipped randomly. Supports For ST-LINK V2 Programmer: ST-LINK Utility 2.0 and above. STVD 4.2.1 and above. STVP 3.2.3 and above. IAR EWARM V6.20 and above. IAR EWSTM8 V1.30 and above. KEIL RVMDK V4.21 and above. Features : PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal resettable fuse, complete protection of your expensive computer motherboard! Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition! With 4 DuPont line, so you can easily respond to different target board line order! Use anti-static bag packaging. SWIM specific features: SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector 1.65 V to 5.5 V application voltage supported on SWIM interface SWIM low-speed and high-speed modes supported SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed SWIM cable for connection to the application Direct firmware update feature supported (DFU) Status LED which blinks during communication with the PC

Thumb

Avatar

0 repins 0 comments

DS3231 IIC RTC Module The DS3231 IIC RTC Module is a highly accurate real-time clock module. It includes 32Kbit EEPROM and a 10-bit temperature sensor with a resolution of 0.25C. The DS3231 IIC RTC module is a budget-friendly solution for precise timekeeping. This I²C RTC boasts exceptional accuracy and comes equipped with a temperature-compensated crystal oscillator and crystal. It also features a battery input, allowing it to maintain accurate time even during power interruptions. By incorporating a crystal resonator, the device boasts improved long-term precision and fewer components needed in manufacturing. The ds3231 Arduino is also available in both commercial and industrial temperature ranges, conveniently packaged in a 16-pin, 300-mil SO format. The IC can be further understood by referring to the attached DS 3231 datasheet. product includes: There are a total of two alarms set for different times of the day. Output from the digital temperature sensor. Sign up for Aging Trim. The DS 3231 RTC features a 2032 Battery Holder. The RTC is extremely precise and takes care of all timekeeping tasks. The real-time clock accurately tracks various elements such as seconds, minutes, hours, date of the month, month, day of the week, and year. It takes into account leap-years and remains valid until the year 2100. The I2C device Address for AT24C32 can be easily configured by using SMD jumpers on the PCB, specifically A0, A1, and A2. An output signal that can be programmed to generate a square wave. Input for maintaining continuous timekeeping using battery backup. Reduce energy consumption to increase the duration of battery life.

Thumb

Avatar

0 repins 0 comments

This DC 3-6 V Mini Micro Submersible Water Pump is a low cost, small size Submersible Pump Motor which can be operated from a 2.5 ~ 6V power supply. It can take up to 120 liters per hour with a very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. The dry run may damage the motor due to heating and it will also produce noise.

Thumb

Avatar

0 repins 0 comments

Heart Beat Sensor The heart beat sensor functions by providing a digital display of pulse readings. As the heart beat detector operates, the LED on the sensor will flash in correlation with each beat of the heart. This digital signal can be linked directly to a microcontroller for accurate measurement of the heart’s Beats Per Minute (BPM) rate. Its operation is based on the modulation of light caused by blood flow through the finger during each pulse. Some notable characteristics of Heart beat Sensor include: The LED displays your heart rate. To quickly have a digital output signal that can be directly connected to a microcontroller Small and easy to carry design. The voltage required for operation is 5V DC. Steps to Establish a Connection: The heart beat sensor is initially supplied with 5V of power. When the forefinger is placed over the sensor, the LED flashes continuously in response to heart pulses. The output pin can be linked to any of the microcontroller’s I/O pins for displaying the heart rate in BPM. There are a variety of different uses for this product, such as in industries, businesses, and personal settings. A monitor is essential today to many health-conscious people who want to track their heart rate. In today’s world, staying in tune with one’s heart rate is highly valued among those who prioritize their health. As a result, a digital heart rate monitor has become a staple device for many individuals. The patient monitoring system is a crucial tool for tracking the health of our patients. This system allows us to closely monitor any changes or progress in their condition, ensuring that we can provide the best possible care. The implementation of bio-feedback control in robotics and its practical uses.

Thumb

Avatar

0 repins 0 comments

This is a USB 2.0 A-B Male Printer Cable 0.3m. It is 30 centimeters long. You can use it as a mobile data transfer cable. This cable is mainly used for Arduino Boards and Flight Controller Boards. These are good quality connectors and have a long life. Features: -USB type:A-B -Long life -Good quality -BlueColor

Thumb

Avatar

0 repins 0 comments

Find the best cost on 9V 3W mini Solar Panel in India. Shop now at Ainow for low prices on high-quality products for your electronics projects.

Thumb

Avatar

0 repins 0 comments

300 RPM BO Motor Straight Single Shaft The 300 RPM BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms. We are supplying the range 300 RPM BO Motor with varying RPM and Gear-Box Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly. Features: Cost-effectiveness of the injection-molding process. Elimination of machining operations. Low density: lightweight, low inertia. Uniformity of parts. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Corrosion-resistance; elimination of plating, or protective coatings. The quietness of operation. Tolerances often less critical than for metal gears, due in part to their greater resilience. Consistency with the trend to greater use of plastic housings and other components.

Thumb

Avatar

0 repins 0 comments

IIC/I2C Serial Interface Adapter Module This is a RoHS compliant IIC/I2C Serial Interface Adapter Module that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16×2 and 20×4 line character modules support it too. This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for Arduino LCD PCF8574. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address) Features: 5V power supply. Serial I2C control of LCD display using PCF8574. Backlight can be enabled or disabled via a jumper on the board. Contrast control via a potentiometer. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing. Size ：41.6 x 19.2 mm.

Thumb

Avatar

0 repins 0 comments

Find the best cost on nodemcu esp8266 cp2102 in India. Shop now at Ainow for low prices on high-quality products for your electronics projects.

Thumb

Avatar

0 repins 0 comments

Soil Moisture Sensor Introducing the Soil Moisture Sensor, a versatile tool for monitoring soil moisture levels in your plants. Equipped with multiple functions including a Soil Humidity Sensor, Water Sensor, and Soil Hygrometer, this module allows you to easily check the moisture content in your pots, gardens, or yards. The two probes serve as variable resistors and can be incorporated into home automated watering systems or linked to IoT devices. Simply install the sensor and its accompanying PCB to keep track of your plant’s water needs and develop your green thumb! The soil moisture sensor comprises a pair of probes that determine the volumetric content of water in the ground. These probes allow an electrical current to flow through the soil and calculate its resistance, providing a measurement of moisture levels. As the water content in soil increases, its ability to conduct electricity increases and results in lower resistance. On the other hand, when soil lacks moisture, it exhibits poor conductivity and leads to higher resistance. Consequently, the moisture level will be higher or lower depending on the amount of water present in the soil. Electrical Wiring Connection The voltage range for VCC is between 3.3V and 5V. Ground: The ground connection is necessary for the safe and proper functioning of the system. The digital output interface is capable of producing two possible signals, 0 and 1. The AO, or analog output interface, allows for the conversion of digital signals to analog signals. Some of the characteristics of Soil Moisture Sensor include: When in dual output mode, the analog output provides a higher level of accuracy. Effortlessly install with a standard bolt hole The indicator lights include a red power indicator and a green digital switching output indicator. With the inclusion of an LM393 comparator chip, stability is ensured.

Thumb

Avatar

0 repins 0 comments

Jumper Cable Female to Female This is 20CM Dupont Wire Color Jumper Cable Female to Female 40PCS. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again. Features: -Compatible with 2.54mm spacing pin headers -40pcs chromatic color jump wire -High quality and in good working condition -Durable and reusable -Easy to install and use -A popular choice for construction or repair -Be used for the electronic project and Genuine Arduino product -Flexible Breadboard Jumper Cable Wire allows you to plug and unplug easily for prototyping.

Thumb

Avatar

0 repins 0 comments

This is 65mm Robot Wheel for BO Motor (Yellow). The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon reinforced plastic rim. We offer a range of robotic wheels, our catalog includes Omni, Mecanum, Heavy Duty Disc Wheels etc., to explore them click below, Wheels and Accessories Features: Car hub is reinforced nylon, very sturdy. Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor

Thumb

Avatar

0 repins 0 comments

Thin Proximity LF 125kHz RFID Cards Introducing the Thin Proximity LF 125kHz RFID Cards, a battery-free option for Contactless data transmission and energy supply. Its operating range can reach up to 100mm, subject to antenna geometry. This versatile card functions at a frequency of 125KHz and boasts a data transfer speed of 106 kbit/s. This card offers Data integrity of 16 Bit CRC, parity, bit coding and bit counting to ensure Anti-collision. It is commonly used in ticketing transactions that can be completed in <100 ms, including backup management. The applications for this card vary from public transportation to access control to event ticketing to gaming and identity. Some notable features include: contactless data transmission and power supply (no battery necessary), anticollision capabilities, an EEPROM with 1Kbit organized into 16 sectors with dual passwords for each sector, customizable access conditions for memory blocks, a data retention period of 10 years, the ability to withstand 100 000 cycles of writing, enhanced security measures such as individual key sets for each sector and a unique serial number for each device. Additionally, there is a transport key that safeguards access to the on-chip delivery of the EEPROM.

Thumb

Avatar

0 repins 0 comments

Find the best cost on Jumper Cable Female to male in India. Shop now at Ainow for low prices on high-quality products for your electronics projects.

Thumb

Avatar

0 repins 0 comments

DHT11 Temperature and Humidity Sensor The DHT11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity. But despite its disadvantages over DHT22, it is smaller and less expensive sensor for temperature and humidity measurement. Note: This package does not include Arduino board, you have to buy it separately. Features: -Low power consumption. -Relative humidity and temperature measurement -All calibration, digital output -Excellent long-term stability -No additional components -Long distance signal transmission -Ultra-low power -4-pin package -Completely interchangeable

Thumb

Avatar

0 repins 0 comments

This Ultrasonic sensor Range Finder is a very popular sensor which is found in many applications where it requires to measure distance and detect the objects. The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver. The HC-SR04 ultrasonic sensor uses sonar to determine the distance to an object like bats or dolphins do. This Ultrasonic Sensor module is a transmitter, a receiver and a control circuit in one single pack!! It has very handy and compact construction. It offers excellent range accuracy and stable readings in an easy-to-use package. Its operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). The Trigger and the Echo pins are the I/O pins of this module and hence they can be connected to the I/O pins of the microcontroller/Arduino. When the receiver detects return wave the Echo pin goes high for a particular amount of time which will be equal to the time taken for the wave to return back to the sensor. Ultrasonic Ranging Module HC-SR04 provides 2cm-400cm non-contact distance sensing capabilities, Ranging accuracy up to 3mm.

Thumb

Avatar

0 repins 0 comments

Find the best cost on 2 Pin Power Cord with Open Ended Cable in India. Shop now at Ainow for low prices on high-quality products for your electronics project.

Thumb

Avatar

0 repins 0 comments

6MM Dead Axle Dummy Motor A passive component, a dead axle Dummy Motor mimics the size and shape of a functional motor but serves only as a support for attaching non-powered wheels to the robot chassis. Additionally, it is compatible with 6mm <=> 4mm Couplings for connecting 4mm wheels to it. The 6MM Dead Axle Dummy Motor boasts a variety of impressive features. The plastic used is of high quality. The diameter of the shaft measures 6mm. The clamp offers the convenience of positioning a DC motor on any solid flat surface, making it suitable for various customized products and devices. It has become a staple in automation robots within industries. Additionally, it is an ideal tool for your project or competition robot as well.

Thumb

Avatar

0 repins 0 comments

1 Channel 5V Relay Module It is a 1 Channel 5V relay module Without Light Coupling Relay. The relay normally open interface maximum load: AC 250V/10A, DC 30V/10A. It has a trigger current of 5mA, and module working voltage of DC 5V. Each channel of the module can be triggered by a jumper to set a high level or a low level. Fault-tolerant design, even if the control line is disconnected, the relay will not move. With status indicator: power (green), 1 channel 5V relay status indicator (red). All module size interfaces can be directly connected through the terminal block, which is convenient and practical. Features: -The 8550 transistor drive, drive ability. -A fixed bolt holes for easy installation. -It has a relay status indicator led Power LED(Green), 1 relay status indicator LED(Red) -Relay control interface by single-chip IO. -Low-level suction close, high-level release. -Easy to use, simple 3 line structure.

Thumb

Avatar

0 repins 0 comments

Next Page