Re roofing Auckland City

Is your roof starting to show its age? Re-roofing is the process of replacing an existing roof with Re roofing Auckland City a newer one, usually because the existing one has begun to leak or wear out. Re-roofing can be an expensive project due to all that needs to be done. Here are five tips that can help reduce the cost and increase the efficiency of your re-roofing job. The first step in any re-roofing project is to inspect the old shingles, soffit, fascia, sand bedding around vents and chimneys, drip edge condition surrounding eaves, and rake trim board flashing. The last thing you want is after spending weeks upon weeks working on your home's new look to have to do any of this work again.

Re-roof at your own risk, however, if the existing roof does not have a UL Class A fire rating, you should consult with your Re Roofing contractor. Before you start thinking about installing your new roof, it's necessary to remove the old one. This process is done by hand and can take several days. Be prepared for this project to take longer than expected due to material Re roofing North Shore damage or poor planning. First, check that the underlayment is tight and secured well to all eaves then move on up to removing shingles. Re-Roofing Removal requires skill because you are often working at great heights above the ground, so always use proper fall protection equipment when re-roofing.

For More Info:-https://www.emazoo.com/blogs/192188/Re-roofing-Auckland-City

https://tacticalroofing.co.nz/